View MPS2907_73371.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Continental Device India Limited
An IS/ISO 9002 and IECQ Certified Manufacturer
IS/ISO 9002 Lic# QSC/L- 000019.2
PNP SILICON PLANAR EPITAXIAL TRANSISTORS
MPS2907 MPS2907A TO-92 Plastic Package
General Purpose Transistors
ABSOLUTE MAXIMUM RATINGS(Ta=25C unless specified otherwise) DESCRIPTION SYMBOL MPS2907 Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Power Dissipation @ Ta=25C Derate Above 25C Power Dissipation @ Tc=25C Derate Above 25C Operating And Storage Junction Temperature Range THERMAL RESISTANCE Junction to ambient Junction to case VCEO VCBO VEBO IC PD PD Tj, Tstg 40 60 5 600 625 5 1.5 12 -55 to +150 MPS2907A 60 75 UNITS V V V mA mW mW/C W mW/C C
Rth(j-a) Rth(j-c)
200 83.3
C/W C/W
Continental Device India Limited
Data Sheet
Page 1 of 5
PNP SILICON PLANAR EPITAXIAL TRANSISTORS
MPS2907 MPS2907A TO-92 Plastic Package
ELECTRICAL CHARACTERISTICS (Ta=25C Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION Collector Emitter Voltage Collector Base Voltage Emitter-Base Voltage Collector-Cut off Current BVCEO * BVCBO BVEBO ICBO VCB=50V, IE = 0 VCB=50V, IE = 0, Collector-Cut off Current Collector-Cut off Current Emitter Cut off Current Base Cut off Current Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage DC Current Gain hFE VCE=10V,IC=0.1mA VCE=10V,IC=1mA VCE=10V,IC=10mA VCE=10V*,IC=150mA VCE=10V*,IC=500mA ELECTRICAL CHARACTERISTICS (Ta=25C Unless Specified Otherwise) DYNAMIC CHARACTERISTICS SYMBOL TEST CONDITION ICEX ICEO IEBO IBEX VCE(sat)* VBE(sat)* TA = 150 C VCE=30V, VEB(off)=0.5V VCE=10V VEB=3V, IC = 0 VCE=30V,VEB(off)=0.5V IC=150mA,IB=15mA IC=500mA,IB=50mA IC=150mA,IB=15mA IC=500mA,IB=50mA
0
IC=10mA,IB=0 IC=10A,IE=0 IE=10A, IC=0
MPS2907 MIN MAX 40 60 5 20 20 50 10 10 50 0.4 1.6 1.3 2.6 35 50 75 100 30 300
MPS2907A MIN MAX 60 60 5 10 10 50 10 10 50 0.4 1.6 1.3 2.6 75 100 100 100 50 300
UNITS V V V nA A nA nA nA nA V V V V A
MPS2907 MIN MAX
MPS2907A MIN MAX
UNITS
Transition Frequency
f T*(1)
IC=50mA, VCE=20V f=100MHz IE=0, VCB=10V f=1MHz Ic=0, VEB=2V f=1MHz
200
200
MHz
Output Capacitance Input Capacitance
Cob Cib
8 30
8 30
PF
PF
Continental Device India Limited
Data Sheet
Page 2 of 5
PNP SILICON PLANAR EPITAXIAL TRANSISTORS
MPS2907 MPS2907A TO-92 Plastic Package
SWITCHING CHARCTERISTICS
SYMBOL TEST CONDITION IC =150mA,IB1 =15mA, VCC =30V td tr ton
MPS2907 MIN MAX 10 40 45
MPS2907A MIN MAX 10 40 45
UNITS
Delay Time Rise Time Turn On Time
ns ns ns
IC =150mA, IB1= IB2 15mA, VCC =6V Storage Time Fall Time ts tf 80 30 100 80 30 100 ns ns ns
toff Turn Off Time *Pulse Condition: Width < 300us, Duty Cycle < 2%. (1) fT is defined as the frequency at which IhfeI extrapolates to unity.
Continental Device India Limited
Data Sheet
Page 3 of 5
MPS2907 MPS2907A TO-92 Plastic Package TO-92 Plastic Package
TO-92 Transistors on Tape and Ammo Pack
Dimension With 'L'
B
Uncontrolled
Ammo Pack Style
MECHANICAL DATA
T P h A A1 (p)
Adhesive Tape on Top Side
D FEE
Carrier Strip 183 mm
h
LABEL
FLAT SIDE
A
H1
H0 L
W2
Wo W1 W
L
Solderability Ensured
t1 t F1 F P2 Po F2 Do
331 mm
42 mm
Beyond 'L'
K
1 2 3 D G AA
Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack
All dimensions in mm unless specified otherwise
D 3 E 2 1
ITEM BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, CLINCH HEIGHT PULL - OUT FORCE
SYMBOL A1 A T P Po P2 F h W Wo W1 W2 Ho H1 L Do t F2 H2 (P)
SEC AA DIM MIN. 4.32 4.45 3.18 0.41 MAX. 5.33 5.20 4.19 0.55
F
F
321
A B C D E F G H K L
PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER
0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 12.70 1.982 -- 2.082
SPECIFICATION REMARKS MIN. NOM. MAX. TOL . 4.0 4.8 5.2 4.8 4.2 3.9 12.7 1 12.7 0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH 6.35 0.4 TO BE MEASURED AT BOTTOM OF CLINCH +0.6 5.08 -0.2 0 1 AT TOP OF BODY 18 0.5 6 0.2 9 +0.7 -0.5 0.5 0.2 16 0.5 23.25 11.0 4 0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N
H
C
All diminsions in mm.
NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES.
Packing Detail
PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK Details Net Weight/Qty 1K/polybag 200 gm/1K pcs 2K/ammo box 645 gm/2K pcs INNER CARTON BOX Size Qty 3" x 7.5" x 7.5" 5K 12.5" x 8" x 1.8" 2K OUTER CARTON BOX Size Qty Gr Wt 17" x 15" x 13.5" 80K 23 kgs 17" x 15" x 13.5" 32K 12.5 kgs
Continental Device India Limited
Data Sheet
Page 4 of 5
Notes
MPS2907 MPS2907A TO-92 Plastic Package
Disclaimer
The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of
Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 www.cdil.com e-mail sales@cdil.com
Continental Device India Limited
Data Sheet Page 5 of 5

▲Up To Search▲

Price & Availability of MPS2907

	To Download MPS2907 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .